
1
GENERAL DESCRIPTION
The NETDK and NETPDK (with proximity card reader) are
secured single-door or double-door digital keypads for use
within the wireless Networx
™
system. These keypads are
wired to the dedicated NETWORXPANEL control panel
and provide controlled access to a door by releasing a
locking device (such as a magnetic lock or electric door
strike) when a proper user code or proximity credential is
presented.
The NETWORXPANEL is capable of controlling two doors
using up to two of any combination NETDK or NETPDK
keypads or two Wiegand devices. In addition, the panel is
equipped with two relays that can be independently as-
signed to either or both keypads. Thus the NETWORX-
PANEL can be configured to allow a user to pass in both
directions--or in only one direction--through a controlled
door.
For example, a door can be configured to allow everyone
to exit, but only a select few to enter. Log entries indicate
the specific keypad used. For more information about the
Networx system, see OI352.
Note: For the purposes of this manual, the word "keypad"
refers to either the Networx
™
NETPDK model keypad or
the Networx
™
NETDK model keypad.
FEATURES
The NETWORXPANEL dedicated control panel contains:
● Circuit board with onboard flash memory;
● 12V power supply, with transformer and rechargeable
back-up battery;
● Inputs supporting two of any combination of NETDK or
NETPDK keypads, PLUS up to two Wiegand devices;
● Special "Two Door Mode" allows two keypads and/or
two Wiegand devices to separately control two doors,
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
Publicly traded on NASDAQ Symbol: NSSC
© ALARM LOCK 2010
Trilogy Networx
™
System
NETWORXPANEL
Wireless Networx Control Panel
INSTALLATION INSTRUCTIONS
WI1856 11/10
Router
Existing
Corporate
Ethernet
Network
NETPDK
NETWORXPANEL
HID
HID CORPORA TION
GATEWAY
W
i
r
e
d
(
R
J
-
4
5
)
o
r
W
i
r
e
l
e
s
s
8
0
2
.
1
1
W
i
r
e
d
(
R
J
-
4
5
)
o
r
W
i
r
e
l
e
s
s
8
0
2
.
1
1
Wire up to
2 Wiegand
Devices
NETDK and/or NETPDK keypads (and/or Wiegand devices) wired to a dedicated NETWORXPANEL control panel
NETDK
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
with one keypad is designated as the "primary" keypad
controlling door number 1, and the other as the
"secondary" keypad controlling door number 2;
● Two Form-C relays;
● Inputs for door position contact to indicate the status of
the door, open or closed;
● Inputs for a remote release button or sensor;
● Onboard bi-directional Networx radio;
● Wiegand interface supports Wiegand device data, red
LED, green LED, and sounder.
SPECIFICATIONS
NETWORXPANEL
Housing Dimensions (H x W x D): 10.5 x 8.5 x 3 inches
(26.6 x 21.6 x 7.6 cm)
TABLE OF CONTENTS
GENERAL DESCRIPTION ....................................................................1
FEATURES ...........................................................................................1
SPECIFICATIONS ................................................................................1
WIEGAND DATA FORMATS SUPPORTED .........................................2
LED AND BUTTON DESCRIPTIONS ...................................................2
TERMINAL DESCRIPTIONS ................................................................2
PLAN YOUR INSTALLATION ...............................................................3
TYPICAL INSTALLATIONS ...................................................................4
INSTALLATION STEPS ........................................................................5
WIRING TWO KEYPADS TO THE NETWORXPANEL ........................6
"TWO DOOR MODE" ............................................................................6
FIRST TIME POWER UP ......................................................................7
POWER RE-APPLIED ...........................................................................8
ERASE ALL PROGRAMMING ..............................................................8
ENROLLING WIEGAND SWIPE CARDS .............................................9
BASIC WIRING EXAMPLES ...............................................................10
WIRING DIAGRAM .............................................................................12
WARRANTY ........................................................................................12
Komentarze do niniejszej Instrukcji