Alarm Lock DL 3000 Podręcznik Użytkownika Pobierz pdf (Strona 17)

Connect the AL-PRE, lock and computer as shown in the figure

below:

1. Plug one end of the DB9 to DB9 Serial Cable into the rear of

the AL-PRE and plug the other end into the selected serial

COM port in the back of your computer.

2. Insert a 9 Volt battery into the back of the AL-PRE, or plug a

9V DC transformer plug into the side of the AL-PRE.

1. Open DL-Windows, press Open, select the Account and

double-click the lock you wish to update with Prox informa-

tion. The Lock Data screen appears.

2. Press the Global button (shown at right) and the

Global Users screen opens. Highlight the User by

pressing the Global ID column of the User you wish

to associate with the ProxCard

or ProxKey

keyfob.

3. On the AL-PRE, press the red Push On button.

Note: If the AL-PRE is inactive (no ProxCards

are being

read) for 5 minutes, the AL-PRE will turn off automatically.

Press the Push On button on the top of the AL-PRE to

“wake up” the AL-PRE.

4. In the Global Users screen, click the Add Cards button.

The ProxCard Enrolling dialog opens. The AL-PRE is now

ready to accept Prox entries.

5. In the ProxCard Enrolling dialog (right), check Enable AL-

PRE.

Enroll ProxCards

with the AL-PRE

DB9 to DB9 Serial

Cable (supplied)

Enroll ProxCards

and ProxKey

keyfobs quickly into DL-Windows, then transfer this new ProxCard

data from the computer through the

AL-PRE to the lock. For PDL series locks only.

IBM COMPATABLE

LAPTOP OR DESKTOP PC

CONNECT DB9 CABLE

TO COMPUTER SERIAL

PORT (COM 1-4)

AL-PRE PROXCARD READER/

ENROLLER

NOTE: OBSERVE TAB DIRECTION

WHEN INSERTING CABLE INTO

AL-PRE AND LOCK

DOUBLE-ENDED MINI BANANA

PLUG CONNECTOR

PDL3000 LOCK

(continued)

Setting up the AL-PRE Proximity Enroller

AL-PRE -- Rear Panel

TO LOCK

TO COMPUTER

DOUBLE-ENDED MINI BANANA

PLUG CONNECTOR

DB9 to DB9 Serial Cable

(supplied)

To lock

NOTE:

OBSERVE

TAB DIREC-

TION WHEN

INSERTING

CABLE INTO

AL-PRE AND

LOCK

To computer

Optional: 9V DC Transformer:

Input: 120V AC, 60Hz, 8W

Output: 9V DC, 333mA min.

Use (1) 9 Volt Alkaline

Battery (Duracell MN1604 or

equivalent) or the 9V DC

Transformer described below.

Add ProxCards® and ProxKey® Keyfobs with the AL-PRE

Click here to

highlight the

User.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

Komentarze do niniejszej Instrukcji

Brak uwag

Alarm Lock DL 3000 Podręcznik Użytkownika Strona 17

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Alarm Lock DL 3000