Alarm Lock DL 3000 Podręcznik Użytkownika Pobierz pdf (Strona 18)

6. Select the Prox card type from the “Card Type” drop down

box.

Card Type Dropdown Box:

There are a few pre-existing Card Types. If your Card Type

is not listed or is unknown, select the “Unknown” type. Se-

lecting "Unknown" will allow you to enter your card into the

system and then assign a badge number (for tracking pur-

poses only) in the Global Users screen. Note that this fea-

ture is only supported when the AL-PRE is connected to the

computer.

7. Place a ProxCard

or ProxKey

keyfob in front of the area

of the AL-PRE labeled "Badge Target" until you hear two

quick beeps. The ProxCard Enrolling dialog closes and

the ProxCard

Data fields in the Global Users screen

become populated, indicating the Prox device has been

enrolled for that User (see below image).

Notice that in the Global Users screen, those Users listed

in the User Name and Pin No. columns with Prox infor-

mation are tinted yellow.

Note: If a previously enrolled ProxCard

or ProxKey

keyfob is presented a second time for enrollment, a popup

warning appears similar to the image shown above.

In the Global Users screen, highlight the Global ID of the User

you wish to edit, press Remove Card to remove ProxCard

ProxKey

keyfob data.

Note: All proximity information for the selected User will be re-

moved from all locks in the Account. When the warning dialog

appears, press Yes to delete the proximity information.

NOTE: You will need to know the Card Format, Badge

Number and Facility Code.

In the Global Users screen, in the ProxCard Data area, press the

Add Cards button. The ProxCard Enrolling dialog opens (below).

To manually add proximity information, first uncheck Enable AL-

PRE. The Card No. and Facility fields become active, as shown

in the following image:

If you choose to add the Proximity data manually, you will

need to know the card format, badge number and Facility

Code. DO NOT GUESS AT THE CARD TYPE! The card

number and Facility Code you enter will be the numbers dis-

played and used by the system. Data entered and accepted

by the system does not mean that the data is verified as cor-

rect. To verify you have selected the correct card type, per-

form the following verification procedure:

Prox Card Verification Procedure:

NOTE: You will need an AL-PRE in order to complete

the verification process.

Manually enter the card information for your selected card

type, then click Build Card. The Prox Card Enrolling dialog

closes and the Global Users screen opens with your Prox-

imity card information populated. Using the AL-PRE, per-

form a search with your newly enrolled card. In the Search

pull-down box select “Prox Card (AL-PRE Needed)” and

present the card to the AL-PRE enroller. If your card is

found, then the entered data is correct. This process may

be performed for all Proximity card types and serves as a

means of verifying your entered data.

Sequential Add

When adding Proximity information with known Card Numbers

in a sequence, select the Sequential Add check box. Se-

quential Add is supported when using the AL-PRE or when

entering the data manually.

In the Number of Cards dialog, enter the number of cards you

will to add sequentially, and click OK. The cards will be added

starting with the first User selected when the ProxCard Enroll-

Remove Cards

(continued)

Add Prox Information--Without the AL-PRE

CNT36bit

38276

Prox information

added for Dave Block

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Komentarze do niniejszej Instrukcji

Brak uwag

Alarm Lock DL 3000 Podręcznik Użytkownika Strona 18

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Alarm Lock DL 3000