Alarm Lock NETWORXPANEL Instrukcja Obsługi Pobierz pdf (Strona 16)

; 1 2 ; 0 0 0 :

12. Clear All Schedules and Timeout Functions

Function 12 clears all programmed Schedules and all Timeout Functions. (To clear All Timeout Functions only, see

Function 13 below). Function 12 will clear all of the following: All Schedule Functions 72 through 93, Timeout Func-

tions 5, 25 through 34 and Function 47. Note: Function 12 also resets Passage Mode and any disabled Groups.

After using Function 12, your Scheduled/Timeout features must be manually re-programmed.

NOTE: Up to 4 Timeout Functions may be pending at any one time. An error beep will sound when attempting to

program more than 4 Timeout Functions. This Function only disables the timeout; the event associated with the time-

out will remain.

; 1 3 ; 0 0 0 :

Function 13 clears all Timeout Functions. (To clear All Schedules and Timeout Functions, see Function 12 above).

Function 13 will clear all of the following: All Timeout Functions 5, 25-34 and Function 47. After using Function 12,

your Scheduled/Timeout features must be manually re-programmed.

NOTE: Up to 4 Timeout Functions may be pending at any one time. An error beep will sound when attempting to

program more than 4 Timeout Functions. This Function only disables the timeout; the event associated with the time-

out will remain.

13. Clear All Timeout Functions

(This Function enabled through keypad only)

CLEAR FUNCTIONS

Group Enable/Disable

Enter the functions below to Enable/Disable Groups. Functions 14 - 23 will each over-

ride existing scheduled events. Therefore, Functions 14 - 23 are temporary, take ef-

fect immediately, and are always overridden by future scheduled events that already

exist within the lock programming.

GROUPS

24. Reserved

; 1 4 :

; 1 5 :

16. Disable Group 3

; 1 6 :

17. Disable Group 4

; 1 7 :

18. Disable All Groups

; 1 8 :

19. Enable Group 1

; 1 9 :

20. Enable Group 2

; 2 0 :

21. Enable Group 3

; 2 1 :

22. Enable Group 4

; 2 2 :

23. Enable All Groups

; 2 3 :

14. Disable Group 1

15. Disable Group 2

Programming Functions (cont'd)

Important: It is the responsibility of the programmer to verify the proper lock/unlock conditions and Group conditions

after programming Function 12 and 13.

PRIORITY ORDER

1. Disabled Users

2. Enabled Groups

3. Disabled Groups

4. Enabled Users

The Priority Order details which Function will

take effect before ("have priority over") others.

As per the list above, Enabled Users have the

lowest priority, and other Functions can affect

the status of these Users. Disabling a Group

(Functions 14-18) will take priority over the

enabled Users in that Group, disabling them.

Enabling Groups (Functions 19-23) will take

priority over those tasks lower in the list, and

finally disabling a User (Function 3) takes prior-

ity over all other tasks listed.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Komentarze do niniejszej Instrukcji

Brak uwag

Alarm Lock NETWORXPANEL Instrukcja Obsługi Strona 16

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Alarm Lock NETWORXPANEL