Alarm Lock NETWORXPANEL Instrukcja Obsługi Pobierz pdf (Strona 17)

GROUPS

Group Enable/Disable with Timeout (Enter Timeout, XXX Hours)

(Functions 25-34 are enabled through the keypad only)

• Hours must be between 001-999. Enter the functions below to Enable/Disable Groups for the amount of time entered in

hours. NOTE: Only 4 Timeout Functions are allowed at any one time. An error beep will sound when attempting to program

more than 4 Timeout Functions. Functions 25 - 34 will each override existing scheduled events. Therefore, Functions

25 - 34 are temporary, take effect immediately, and are always overridden by future scheduled events that already exist

within the lock programming. NOTE: Functions 25-34 are enabled through the keypad only.

• Example: All 15 members of the Accounting Department are members of Group 4, and a schedule programmed in the

department's NETWORXPANEL reflects their normal working hours of 9 AM through 5 PM, Monday through Friday. But

one day a special event occurs, and all Accounting Department members are requested to stay an extra hour until 6

PM. Therefore, at 5 PM, the manager (wishing to temporarily enable Group 4 users for an extra hour) enters Program

Mode and presses: ; 33 ; 001 :. Likewise, if the manager wished to send his de-

partment home early at 3 PM, the manager could enter ; 28 ; 002 :.

; 3 5 ; [ _ _ _ ] ; [ _ _ _ _ ] :

(User Number) (Groups)

35. Group Add/Delete Association

As per the chart on page 8, the NETWORXPANEL default programming from the factory associates certain User Num-

bers with certain Groups. To override these default Group associations, Function 35 manually associates (or disassoci-

ates) a selected User with a selected Group (Groups not selected are then disassociated from the User). Function 35 is

helpful when the number of Users you wish to add to a Group outgrows the number of User Numbers defaulted to a

Group (50); or if an existing User joins a department and you wish to simply add them to a Group.

• User Number must be between 2 and 5000; Groups 1-4 (to associate with User) may be selected.

Add Example: To associate User 67 with Groups 1, 2 and 4;

Enter: ; 3 5 ; 6 7 ; 1 2 4 :

Delete Example: To remove all Group associations for User 67;

Enter: ; 3 5 ; 6 7 :

NOTE: If a User is associated with more than one Group, all associated Groups would have to be disabled before the User is disabled.

; 2 5 ; [ _ _ _ ] :

(XXX Hours)

25. Timed Disable Group 1

; 2 6 ; [ _ _ _ ] :

(XXX Hours)

26. Timed Disable Group 2

; 2 7 ; [ _ _ _ ] :

(XXX Hours)

27. Timed Disable Group 3

; 2 8 ; [ _ _ _ ] :

(XXX Hours)

28. Timed Disable Group 4

; 2 9 ; [ _ _ _ ] :

(XXX Hours)

29. Timed Disable All Groups

; 3 0 ; [ _ _ _ ] :

(XXX Hours)

30. Timed Enable Group 1

; 3 1 ; [ _ _ _ ] :

(XXX Hours)

31. Timed Enable Group 2

; 3 2 ; [ _ _ _ ] :

(XXX Hours)

32. Timed Enable Group 3

; 3 3 ; [ _ _ _ ] :

(XXX Hours)

33. Timed Enable Group 4

; 3 4 ; [ _ _ _ ] :

(XXX Hours)

34. Timed Enable All Groups

36 - 37. Reserved

Clear All Timeout Functions by entering Function 13.

NOTE:

Programming Functions (cont'd)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Komentarze do niniejszej Instrukcji

Brak uwag

Alarm Lock NETWORXPANEL Instrukcja Obsługi Strona 17

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Alarm Lock NETWORXPANEL