Alarm Lock Trilogy DL2800 Instrukcja Obsługi Pobierz pdf (Strona 19)

60. Number of Attempt Before Lockout

61. Set the Attempts Lockout Time

•

Number of attempts before lockout must be 1-9 attempts.

•

The number of attempts is reduced by half every time the keypad is locked out without a

successful code entry (default is 6 attempts).

•

The attempt count is reset each time a valid code is entered.

•

Lockout Time must be 1-60 seconds.

How long the keypad is locked out after a series of unsuccessful attempts (default is 15

seconds).

LOCKOUT

; 6 4 :

64. Disable Remote Input

•

Wire a Normally Open Contact to Terminals 3 & 4. Momentarily close to allow person to

pass through door.

•

Enter the functions below to Disable/Enable the Remote Input.

NOTE: The Remote Input is enabled as part of the default program.

Remote Input Disable/Enable

; 6 5 :

65. Enable Remote Input

66. Reserved

REMOTE INPUT

; 6 0 ;

[ _ ]

(Number of Attempts)

; 6 1 ; [ _ _ ] :

(Lockout Time)

62-63. Reserved

59. AL-DTM Door Number

•

Door Number must be between 1- 96.

For use with Alarm Lock’s AL-DTM Data Transfer Module. Using the AL-DTM up to 48

locks (96 for AL-DTM2) can be Downloaded/Uploaded and History LOGs can be

retrieved. Enter a door number for each lock. After configuring the AL-DTM, using

Alarm Lock's DL-WINDOWS Software, any of the following data transfers can be

initiated by plugging the AL-DTM into the lock and simply entering User Code 299 at the

lock.

•

Upload Lock Program

•

Upload History LOG

•

Download Lock Program

AL-DTM

; 5 9 ;

[ _ _ ]

Door Number)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Komentarze do niniejszej Instrukcji

Brak uwag

Alarm Lock Trilogy DL2800 Instrukcja Obsługi Strona 19

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Alarm Lock Trilogy DL2800